In this video, you’ll learn how to make changes to an engine lathe.
Project Sheet 1 PSR1#1 - File/Drill & Tap Gage
By Kelly Curran
This lesson provides a drawing with steps to complete the activity.
By Terry Bartelt
In this learning activity you'll review the operation of a NOR gate by using a truth table, a Boolean Algebra equation, a switch analogy, and a written statement.
Safe Handling and Installation of Shielding Gas Cylinders
The learner will understand proper safe handling and installation procedures for shielding gas cylinders.
Saw - Vertical - Marvel - Operator's Panel
By Dave Hoffman
In this learning activity you'll explore the control panel of a Marvel 460A-PC vertical band saw and learn how to make a simple cut.
Engine Lathe: Basic Components and Operation
In this video, you’ll explore the engine lathe, its basic components, and you’ll learn to operate its machine controls.
Squaring the Toolhead
By Erich Krowas
In this video, we’ll go over the necessary steps to square the toolhead on a Bridgeport mill.
Using a Steady Rest
In this video, you’ll learn how to set up a long piece of tubing using a steady rest, so that you can bore the ends for a bearing.
Cutting Tapers using the Taper Attachment
This video will show you how to setup and cut a taper using a taper attachment.
Mounting and Indicating a Vise
In this video, you’ll explore how to use a vise on a Bridgeport mill to securely hold your workpiece.
Cutting Tool Geometry
You'll practice identifying relief angles and rake angles related to lathe cutting tools.
Turning Between Centers
The learner will identify tools and practices associated with setting up a lathe to turn between centers.
Creative Commons Attribution-NonCommercial 4.0 International License.
Learn more about the license »
Give your new group a name.