CNC Control Features
By Terry Tower
In this learning activity you'll discover the features of a Puma Daewoo O-T CNC Lathe Control panel.
By Barbara Anderegg
In this learning activity you'll explore the history behind gage blocks.
Using Gage Blocks: Discussion and Quiz
In this learning activity you'll identify the consequences of using gage blocks incorrectly.
Procedure for Setting the Tool Length Offsets on a Vertical CNC Machining Center with a Fanuc O-M Control
By Les Rhines
Students view how the tool length offsets are set on the CNC Machine. They read a description of a method that uses a 2-inch gage block as a height reference.
Gage Block Combinations Review
By Kelly Curran, Janet Braun
In this learning activity you'll test your ability to select the proper gage blocks when making a stack.
Steel Rules Test
By Kelly Curran
In this learning activity you'll test your knowledge of the different types of steel rules as well as how to use and read them correctly.
Lathe Accessories - Tool Holding
In this learning activity you'll explore lathe tool-holding techniques.
In this learning activity you'll review angles and different types of angular measuring tools associated with manufacturing.
Cutting Tapers using the Taper Attachment
This video will show you how to setup and cut a taper using a taper attachment.
Marvel Saw: Clearing Out a Job
By Dave Hoffman
In this simulation, learners follow steps to clear out a job that had been previously created.
Optical Comparator: Establishing a Reference Frame on the Starrett HB 400
In this interactive learning object, learners read how to compensate for a part not mounted perfectly parallel to the machine axis.
Print Reading: Three-Step Block
Learners test their ability to visualize a three-step block in this interactive exercise that features animated pictorial views.
Parts Make an Assembly
By Glenn Sokolowski
Learners examine the relationship of individual parts in an assembly drawing. Assembly drawing notes, fabricated and purchased parts, and sectional views are explained briefly.
Print Reading: Hub
Learners practice reading prints of a hub. They identify information located on the print and calculate missing dimensions.
Using an Edge Finder
The learner will use an edge finder to locate the edge of a workpiece.
Shear - Hydraulic - Adira - Setting Back Gauge
Step-by-step of setting the back gauge with an Adira Hydraulic Shear.
Top Bender - Operator's Control Panel
Learners are asked to program the Top Bender following the same steps they would if working on the actual control panel.
Lathe Turning Machine Types
In this learning activity you'll explore Lathe Turning Machines.
Darex Model SP2000 Drill Sharpening Machine
By Mike Cattelino
Learners view step-by-step instructions for how to set up and sharpen a drill bit in the Darex drill grinder, model SP2000.
Eagle Power Roller - Operator's Control Panel
In this learning activity you'll discover how the Eagle Power Roller control panel operates.
Print Reading: Angled Mount
Learners test their ability to visualize an angled mount in this interactive exercise that features animated pictorial views.
Print Reading: Step Block
In this animated print reading exercise, the learner calculates missing dimensions and identifies surfaces on projected views.
Angular Measurement Review
In this learning activity you'll test your knowledge of angular measurement in this 10-question quiz.
Using a Steady Rest
In this video, you’ll learn how to set up a long piece of tubing using a steady rest, so that you can bore the ends for a bearing.
Setting Up and Using an Offset Boring Head
By Erich Krowas
This video will examine the parts of an offset boring head, and how to setup and use the head.