Print Reading: Mounting Wedge
By Kelly Curran
Learners test their ability to visualize a mounting wedge in this interactive exercise that features animated pictorial views.
Print Reading: Slotted Block
In this learning activity you'll illustrate your ability to visualize a slotted block.
Print Reading: Step Block
In this animated print reading exercise, the learner calculates missing dimensions and identifies surfaces on projected views.
Print Reading: Three-Step Block
Learners test their ability to visualize a three-step block in this interactive exercise that features animated pictorial views.
Procedure for Setting the Tool Length Offsets on a Vertical CNC Machining Center with a Fanuc O-M Control
By Les Rhines
Students view how the tool length offsets are set on the CNC Machine. They read a description of a method that uses a 2-inch gage block as a height reference.
Programming Hurco Controller – CNC
By Dave Hoffman
In this learning activity you'll practice operating the Hurco Controller in the CNC mode.
Programming Hurco Controller – Manual Mode
In this learning activity you'll review an explanation of how to operate the Hurco Controller in the manual mode.
Project Sheet: Radial Drilling Angle Plate Part 2a
This project gives a drawing with steps to complete the activity.
Reading a Micrometer
By Sue Silverstein
In this learning activity you'll practice reading a micrometer.
Reading Vernier Height Gage Quiz
By Barbara Anderegg
Students take a 13-question quiz to practice reading 25- and 50-division Vernier height gages.
Safety Scene - Grinding Edition
By lloyd
In this learning activity you'll recognize potential safety hazards around grinding equipment
Saw - Marvel - PCII - Clearing a Job
The student learns how to delete a job after it is programmed in the Marvel PCII.
Saw - Marvel - PCII - Keys Explained
In this learning activity you'll explore the Marvel PCII keys.
Saw - Marvel - PCII - Manual Programming
In this learning activity you'll review step-by-step instructions for the Marvel PCII using manual programming.
Saw - Marvel - PCII - Programming a Job (Full CNC)
The student views step-by-step instructions for programming a "job" with the PCII on the Marvel vertical band saw.
Sectional Views
By Glenn Sokolowski
In this interactive object, learners examine sectional views used in engineering drawings. The sections shown are full, half, offset, aligned, revolved, and broken-out. Learners match drawings of sectional views with the names of the views.
Setting Up and Using an Offset Boring Head
By Erich Krowas
This video will examine the parts of an offset boring head, and how to setup and use the head.
Shear - Hydraulic - Adira - Setting Back Gauge
Step-by-step of setting the back gauge with an Adira Hydraulic Shear.
Sine Bar
In this learning activity you'll examine how a sine bar is used to measure angles.
Spark Testing of Materials
By Thaddeus Hetzer
The learner sees photos of the spark patterns of various materials and their related properties.
Squaring a Part
This video will guide you through the process of squaring a part on a milling machine.
Squaring the Toolhead
In this video, we’ll go over the necessary steps to square the toolhead on a Bridgeport mill.
Steel Rule Types
In this learning activity you'll review different types of steel rules used in manufacturing.
Steel Rules Test
In this learning activity you'll test your knowledge of the different types of steel rules as well as how to use and read them correctly.
The Dial Caliper
Learners review guidelines for the proper use of a dial caliper. Illustrations appear throughout the learning object.