Warning! This learning object uses Adobe Flash and your browser does not support Flash. To view this content you will either need to install and/or enable flash in your web browser or upgrade your web browser.
Click Here for instructions to enable Flash.
This project gives a drawing with steps to complete the activity.
Lathe Project: Draw Tube (Internal Thread Cutting)
By Kelly Curran
Programming Hurco Controller – CNC
By Dave Hoffman
In this learning activity you'll practice operating the Hurco Controller in the CNC mode.
Using Gage Blocks: Discussion and Quiz
By Barbara Anderegg
In this learning activity you'll identify the consequences of using gage blocks incorrectly.
Procedure for Setting the Tool Length Offsets on a Vertical CNC Machining Center with a Fanuc O-M Control
By Les Rhines
Students view how the tool length offsets are set on the CNC Machine. They read a description of a method that uses a 2-inch gage block as a height reference.
Ammco Brake Lathe Controls
By Bill Heesaker
In this animated activity, learners examine the various controls that operate an Ammco brake lathe.
Lathe Turning Machine Types
In this learning activity you'll explore Lathe Turning Machines.
This document gives an overview of chuck maintenance.
Lathe - Cutting Tool Shapes
This document is a visual and text description of lathe cutting tool shapes.
Lathe Cutting Speeds - RPM Calculations
This document is a visual and text description of lathe cutting speeds and RPM calculations.
Creative Commons Attribution-NonCommercial 4.0 International License.
Learn more about the license »
Give your new group a name.